**Diameter and Length at Room Temperature**

Best SD Length - Room Temperature

Worst SD Length - Room Temperature

Best SD Diameter - Room Temperature

Worst SD Diameter - Room Temperature

Highest Diameter Delta of all Samples

Highest Length Delta of all Samples

Lowest Diameter Delta of all Samples

Lowest Length Delta of all Samples

Manufacturer of Highest Count of Perfectly (to the .0005) Round Per Sample Size

Manufacturer of Highest Count of Perfect (to the .0005) Length Per Sample Size

Manufacturer of Lowest Count of Perfectly (to the .0005) Round Per Sample Size

Manufacturer of Lowest Count of Perfect (to the .0005) Length Per Sample Size

Worst Non-Round 2-Measurement Delta Bullet (Room Temperature)

Worst Entire-Sample-Size Average Non-Round Delta (Room Temperature)

Best Non-Round 2-Measurement Delta Bullet (Room Temperature)

Best Entire-Sample-Size Average Non-Round Delta (Room Temperature)

Worst Length 2-Measurement Delta Bullet (Room Temperature)

Worst Entire-Sample-Size Average Length Delta (Room Temperature)

Best Length 2-Measurement Delta Bullet (Room Temperature)

Best Entire-Sample-Size Average Length Delta (Room Temperature)

Manufacturer/Design of Highest Thermal Expansion Rate Diameter - 300F (compared to Room Temp)

Manufacturer/Design of Lowest Thermal Expansion Rate Diameter - 300F (compared to Room Temp)

Manufacturer/Design Lowest Diameter SD of Thermal Expansion - 300F (compared to Room Temp)

Manufacturer/Design of Highest Diameter SD of Thermal Expansion - 300F (compared to Room Temp)

Manufacturer/Design of Highest Thermal Expansion Rate Diameter - -45C (compared to Room Temp)

Manufacturer/Design of Lowest Thermal Expansion Rate Diameter - -45C (compared to Room Temp)

Manufacturer/Design Lowest SD of Thermal Expansion Diameter - -45C (compared to Room Temp)

Manufacturer/Design of Highest SD of Thermal Expansion Diameter - -45C (compared to Room Temp)

Manufacture/Design of Maximum Diameter Delta Bullet (-45C to 300F)

Manufacture/Design of Maximum Diameter Delta of all Samples Averaged (-45C to 300F)

Manufacture/Design of Minimum Diameter Delta Bullet (-45C to 300F)

Manufacture/Design of Minimum Diameter Delta of all Samples Averaged (-45C to 300F)

Lowest Weight Delta In A Sample Size

Highest Weight Delta In A Sample Size

Highest SD of Weight Per Sample Size

Lowest SD of Weight Per Sample Size

Cost per round from Common Available Quantity

Lowest SD of Diameter for the Money

Lowest SD of Length for the Money

Lowest Delta of Diameter (Sample Averaged) per Bullet (Concentricity) for the Money

Lowest Delta of Length (Sample Averaged) per Bullet (Concentricity) for the Money

Lowest Weight Delta (of Total Samples) for the Money

3D-Graph of SD-Length, SD-Width, SD-Weight, With Cost written at the top if possible.

** Note: **I am not sure how the extreme freezing or heating will effect bullet hardness, someone might want to test this in the future....hint..

I would also like velocity tests as it correlates to diameter and temperature.

Least Variance at room temp Diameter and Length AVG SD Mean Median Mode AVG away from stated geometry and weight Concentricity vs. lead and jacket weight

Back to main bullet study page

Back to BrainLubeOnline.com